View FX5-80P-SH_278581.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1mm Pitch Connector for Vertical Connection
FX5 Series
Connecting Height: Low profile
FX5_*S2A_DSA
FX5_*P_SH
( 3.6 )
PCB
sFeatures
1. Header Side : 2 Types Available
Two header types, low profile and high profile, are prepared according to the contact number variation and the connecting height variation, considering unit connections of HDD, FDD, CDROM and so on.
Connecting Height: High profile
FX5_*S2A_DSA
FX5_*P_SH3
2. Two-stages Sequential Structure
( 6.6 )
The connecting sequence is designed with 2 stages so that the end user side can maintain.
3. Mating Guide
In the connecting process, the self-alignment is 1mm high sufficient to the guide level, and the guide rib is provided to achieve easy mating.
PCB
4. SMT Coplanarity
The coplanarity of SMT soldered area secures the high accuracy of 0.1mm.
5. Miniaturization
The connector is miniaturized about 30% in the mounting area, compared with the conventional half pitch connector (1.27mm).
sApplications
Note PC , other business equipments
A206
sProduct Specifications
Rating Current rating 0.5A Operating Temperature Range -55c to +85c (Note 1) Storage Temperature Range -10c to +60c (Note 2) 40% to 80% Storage Humidity Range 40% to 70% Voltage rating 100V AC Operating Humidity Range
Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration 5. Moisture Resistance 6. Temperature Cycle 100M ohms min.
Specifications 250V DC 300V AC/1 minute 100mA
Condition
No flashover or insulation breakdown.
50m ohms max.
No electrical discontinuity of 1s or more
Contact resistance: 60m ohms max. Insulation resistance: 100M ohms min. Contact resistance: 60m ohms max. Insulation resistance: 100M ohms min.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95%
(-55c: 30 minutes, 15 to 35c: 2 to 3 minutes (-85c: 30 minutes, 15 to 35c: 2 to 3minutes) 5 cycles 500 cycles
7. Durability (Mating/un-mating) Contact resistance: 60m ohms max. 8. Resistance to Soldering heat No deformation of components affecting performance.
Reflow: At the recommended temperature profile Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part Insulator Header Contact Receptacle Contact Material Polyamide Brass Phosphor bronze Finish Beige Contact area : Gold plated Lead area : Tin-lead plated Remarks UL94V-0 ________ ________
Note : The black dots on the insulater will not affect performance.
sOrdering Information
qHeader
FX5
q
- * P - SH 3
w e r t
q Series Name e Connector Type r Contact type SH
: FX5 P: Header
t Connector Height Blank 3 : 6.5mm : 9.5mm
w Number of Contacts : 20, 40, 52, 56, 68, 80
: Right angle SMT type Note: The 56 contact header is for SH 3 type only.
qReceptacle
FX5
q
- * S 2 A - DSA L
w e r t y u
q Series Name e Connector Type r Contact Sequence 2 t Serial No. : A
: FX5 S: Receptacle : 2 Stages Sequence
y Contact type DSA Blank L : Straight through hole type : Without board prefixed pin : With board Prefixed pin u Board prefixed pin
w Number of Contacts : 20, 40, 52, 56, 68, 80
A207
sHeader
Low profile
High profile
b1 ( 0.5) b1 b2 b* 9.50.3 ( 3.5 )
b2
b*
6.50.3
**
**
b1
b1
a1
60.3
60.3
a1
* = (number of contacts)/2 =
a1
a2 1 A B0.3 C0.5 D0.3 Polarity Mark
a*
a1
a2 1
a*
1.70.3
1.70.3
0 1_0.2
A B0.3 C0.5 D0.3 Polarity Mark
0 1_0.2
9.30.3
9.30.3
a1 b1 a2
b2 0.5 E F0.3
b* a*
1.40.3 2.50.3
a1 b1 a2
b2 0.5 E F0.3
b* a*
1.40.3 2.50.3
( O1.3 )
t0.20.05w0.20.05 2_O2.30.15 ( 1.3 ) 6.350.3
( O1.3 )
t0.20.05w0.20.05 2_O2.30.15 ( 1.3 )
6.350.3
G0.1
3.20.2 2.50.3
3.20.2 2.50.3
G0.1
Unit: mm Part Number FX5-20P-SH FX5-20P-SH3 FX5-40P-SH FX5-40P-SH3 FX5-52P-SH FX5-52P-SH3 FX5-56P-SH3 FX5-68P-SH FX5-68P-SH3 FX5-80P-SH FX5-80P-SH3 CL No. 575-0001-7 575-0041-1 575-0005-8 575-0045-2 575-0006-0 575-0046-5 575-1001-2 575-0008-6 575-0048-0 575-0009-9 575-0049-3 Number of Contacts 20 40 52 56 68 80 A 9 19 25 27 33 39 B 24 34 40 42 48 54 C 22.9 32.9 38.9 40.9 46.9 52.9 D 19 29 35 37 43 49 E 9.5 19.5 25.5 27.5 33.5 39.5 F 20 30 36 38 44 50 G 13.6 23.6 29.6 31.6 37.6 43.6
A208
sReceptacle
4.250.2 A 0.2 a2 a1
b1 a1
1 a*
**
60.3
* = (number of contacts)/2 b1 b2 B 0.3 5.90.2 C E F
+0.1 -0.2
b*
E-E
F-F
3.30.3
3.40.3
F E D 0.3
1.50.2 1.50.2
1.50.2
0.60.3
t0.250.03xw0.40.05 30.3 Polarity Mark
Unit: mm Part Number FX5-20S2A-DSA FX5-20S2A-DSAL FX5-40S2A-DSA FX5-40S2A-DSAL FX5-52S2A-DSA FX5-52S2A-DSAL FX5-56S2A-DSA FX5-56S2A-DSAL FX5-68S2A-DSA FX5-68S2A-DSAL FX5-80S2A-DSA FX5-80S2A-DSAL CL No. 575-0101-1 575-0121-9 575-0105-2 575-0125-0 575-0106-5 575-0126-2 575-0107-8 575-0127-5 575-0108-0 575-0128-8 575-0109-3 575-0129-0 Number of Contacts 20 40 52 56 68 80 A 9 19 25 27 33 39 B 19 29 35 37 43 49 C 15.08 25.08 31.08 33.08 39.08 45.08 D __ 15 __ 25 __ 31 __ 33 __ 39 __ 45 Order of Contact Sequence(Contact No.) 1 a1,a2,a9,a10 b1,b2,b9,b10 a1,a2,a19,a20 b1,b2,b19,b20 a1,a2,a25,a26 b1,b2,b25,b26 a1,a2,a27,a28 b1,b2,b27,b28 a1,a2,a33,a34 b1,b2,b33,b34 a1,a2,a39,a40 b1,b2,b39,b40 2 a3 to a8 b3 to b8 a3 to a18 b3 to b18 a3 to a24 b3 to b24 a3 to a26 b3 to b26 a3 to a32 b3 to b32 a3 to a38 b3 to b38
A209
BPCB mounting pattern
qHeader FX5-*-SH, FX5-*-SH3
40.1 A 0.1 B 0.05 2.050.05 3.150.1 C 0.05 0.50.02 0.30.03 (Land pattern) 0.250.03 (Metal mask) 40.1
(Mating side)
(5.95)
2.550.1
2.10.1
a1 (Polarity mark position) b1
b2 a2 D0.1
a* b* 2-O2.3
+0.1 0
2.150.1
3.40.1 * = (number of contacts)/2
2-O1.40.05
qReceptacle FX5-*S2A-DSA
E 0.1 10.05 a2 a1 (Polarity mark position) a3 a4 1.50.05 b4 b3 O0.6 +0.1 0 b* 1.50.05 1.50.05 b* 1.50.05 1.50.05 b4 b3 b2 O0.6 +0.1 0 * = (number of contacts)/2 * = (number of contacts)/2 F 0.1 30.05 10.05 a2 a1 (Polarity mark position) a3 a4 a* E 0.1 a* 1.50.05
b1 b2
FX5-*S2A-DSAL
2-O2.3 +0.1 0
b1
Unit: mm Number of Contacts 20 40 52 56 68 80 A 16 26 32 34 40 46 B 13.6 23.6 29.6 31.6 37.6 43.6 C 9.5 19.5 25.5 27.5 33.5 39.5 D 20 30 36 38 44 50 E 9 19 25 27 33 39 F 15 25 31 33 39 45
Note: If the connector is installed in the board beyond the above recommended size, it may cause the connector to board mounting failure or the soldering failure. It is desirable to implement the board process on the recommended PCB mounting pattern.
A210
BRecommended Temperature Profile
250
Less than 5 seconds 230c
200 Temperature (c) 100
200c
Applicable Conditions
150
160c 150c
Reflow system Solder Test board
:IR reflow : Paste type 63 Sn/37 Pb (Flux content 9 wt%) : Glass epoxy 85mm x 60mm x 1.6 mm Metal mask thickness: 0.15 mm
50
25c
0 START
30 seconds 60~90 seconds Preheating 60 120 Time (Second) 20~30 seconds Soldering
Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount.
60 seconds
BCleaning Conditions 1. Organic Solvent Cleaning
Solvent IPA (Isopropyl alcohol) HCFC (Hydrochlorophloro carbon)
*Methylene chroride isn't suitable for this product solvent.
Cold Cleaning
Heat Cleaning
2. Liquid Cleaning
When liquid detergents (such as terpene, alkali saponifier) are used, please select the cleaning detergent according to the influence table on metal or resin which is issued from each detergent manufacturer.In addition, please do not leave the connector outdoor, in which moisture remains.
3. Cautions for Cleaning
As for organic solvent or liquid cleaning, if flux or detergent remains on the connector, it can cause electrical performance degradation. Therefore, please make sure that the connector is thoroughly cleaned so that neither flux nor detergent is found on the connector.
A211
BConnector Precautions 1. Tolerance Clearance on Mating Side
The effective connection clearance of the product is 1.6mm. Please use the product so as to specify within 1mm the clearance between the header and the receptacle in the connection process.
1
2. Header Connector Height
The SMT connector height doesn't include the solder paste thickness. Thus, please consider that the stacking height will slightly increase after the mounting process.
Mating Height: Low profile
Mating Height: High profile
FX5-*P-SH3
FX5-P-SH
( 3.6)
( 6.6)
PCB
PCB
3. Screw Fastening Torque (SMT Type)
When the screw is fastened, please use the M2 screw. The recommended fastening torque is 0.15(N.m) max.
Nut (M2)
Plain sheet (t = 0.3) Screw (M2)
Board (t = 1.6) Spring sheet (t = 0.5)
4. Prefixed Process to Board (Through hole Type)
If the prefixed process is required for board mounting, please use the prefixed pin type. (Applicable Thickness t = 1.60.1) Note: When the connector is mounted on the board, the dip post is guided into the board through-hole in order to prevent the dip post damage, and then insert the board in parallel to the connector so as to push in the prefixed pin.
Dip post Prefixed pin PCB
5. Plug and Play
When the connector is inserted or extracted in the active line state, please contact HRS company.
6. Others
q It is noted that the forced excessive insertion/extraction will result in damage. q Avoid holding the board with the connector only, and fix the board by any other means except for the connector. q The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot, but the difference doesn't affect the performance.
A212

▲Up To Search▲

Price & Availability of FX5-80P-SH

	To Download FX5-80P-SH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .